HPE J9772A Price – Aruba 2530 48G PoE+ Switch



  • Brand HP
  • Model: HPE J9772A – Aruba 2530 Switch
  • Number of Ports 48 Included Components
  • Throughput Up to 77.3 million PPS (64-byte packets)
  • Switching capacity 104 Gb/s
  • Condition: New
SKU J9772A Categories , Tags ,

Free Shipping

24 - 72 Hours Estimated delivery

No Hidden Charges

No Taxes and Duties



Aruba J9772A 2530 Series Gigabit Ethernet devices are enterprise-class, fully managed, Layer 2 edge switches delivering cost-effective, reliable, and secure connectivity for business networks. Designed for entry-level to midsize enterprise networks, these Gigabit Ethernet switches deliver full Layer 2 capabilities with enhanced access security, traffic prioritization, IPv6 host support, and optional PoE . The 2530 48G PoE model has 48 x 10/100/1000 PoE-enabled ports and four Gigabit SFP ports.


J9772A Specifications

Type Aruba 2530-48G-PoE Switch
System Specifications
  • · 48 RJ-45 autosensing 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE ); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
  • · 4 fixed Gigabit Ethernet SFP ports
  • · 1 Dual-personality (RJ-45 or USB micro-B) serial console port.
Memory and processor Processor: ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated.
Mounting Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting.
Management IMC – Intelligent Management Center; Command-Line Interface (CLI); Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB.
Performance (IPv6 Ready Certified)
1000 Mb latency < 2.3 µs (LIFO 64-byte packets)
100 Mb Latency < 7.4 µs (LIFO 64-byte packets)
Throughput Up to 77.3 million PPS (64-byte packets)
Switching capacity 104 Gb/s
MAC address table size 16000 entries
Physical specifications
Dimensions (W x D x H) 44.3 x 32.26 x 4.45 cm (17.44 x 13.00 x 1.75 in) (1U height)
Weight 4.72 kg (10.4 lb)
Electrical specifications (J9772A)
Maximum heat dissipation 236 BTU/hr (248.98 kJ/hr), (switch only: 236 BTU/hr; combined switch max. PoE devices: 1624 BTU/hr)
Voltage 100 – 127 / 200 – 240 V ac
Current 5.8/2.9 A
Idle power1 40.1 W
Maximum power rating2 476 W
PoE power 382 W
Frequency 50/60 Hz
NOTE: 1: Idle power is the actual power consumption of the device with no ports connected.

2: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the total power budget available to all PoE ports.

Environmental specifications (J9772A)
Operating temperature 0° to 45°C (32° to 113°F)
Operating relative humidity 15% to 95% @ 40°C (104°F), non-condensing
Non-operating/storage temperature -40° to 70°C (-40° to 158°F)
Non-operating/storage relative humidity 15% to 90% @ 65°C (149°F), non-condensing
Altitude Up to 3 km (10,000 ft)
Acoustic Power: 33.6 dB, Pressure: 43.9 dB
Safety agency certifications (J9772A)
Safety UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
NOTE: IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE models only. When using SFPs with this product, SFPs with revision “B” or later (product number ends with the letter “B” or later, e.g., J4858B, J4859C) are required.